Natural as wood…

Austrian traditions of wood treatment


Effectiveness
and Naturality
head

Natural power and safety

Care furniture wax No.5030

 

Refreshing and taking care of furniture and other wooden surfaces finished with natural oils and waxes. Solids content makes 100%.

Use
It is applied for renewing and refreshing of furniture and other wooden surfaces in-door. It is suitable neither for floors treatment nor for out-door use.
Technical data sheet — PDF
Properties Directions for use
Gloss: The gloss has a silky look; a final appearance depends on a gloss of a compound, which the wood was finished with.
Complete composition: linseed oil, castor oil; boiled down wood oil; fatty acids from vegetable oils; wax of carnauba palm; beeswax; fir needle oil; silicon oxide.
Content of artificial substances: Сontains no artificial substances, fast-drying materials, conserving agents and heavy metals.
Thinning agent: not applicable. In a case of thickening, the compound is to be thoroughly mixed and (if needed) a little bit warmed in a container with hot water (do not use any heaters or gas-burners!).
Solids content: 99 to 100%.
Storage: It is supposed to be stored in a dry cool place in tightly closed packing under temperature not lower than +5°С and preferably not higher than +35°С. In a case of freezing down after a thorough mixing, a consistency and properties of the compound restore completely (the process accelerates in a case of container warming with hot water).
Shelf life: Storage term in the original closed container is about 12 months.
Container volume: 0.5 l.
Class of hazard: Not applicable.
Density: 0.92 to 0.95 g/cm3.
Viscosity: ~40 to 45 sec (DIN-size beaker 4 mm).
Flash-point: Do not apply at more than 200°C.
Quantity used: 200 to 300 m2/l depending on absorptiveness of a surface, contamination degree and application features.
Drying time: Complete drying up time and soaking happens in 24 to 36 hours at temperature 20°C and humidity 50-60%.
Surface preparation: The surface is needed to be cleaned from grease and dust. In a case of a considerable contamination, wash it with water and soap or with a non-abrasive detergent and dry up.
Application process: Mix the compound and apply it in a very sparing way with a soft natural lint free tissue along the grain with aid of slight rubbing-down movements. Time of penetration and drying up makes 24 to 24 hours under 20°C and humidity 50-60%. If desired, for a greater gloss, in 24 hours after application process, the surface can be slightly polished with a soft natural lint free tissue or with a polishing machine with a white pad.
Tinting: Not applicable.
Tool cleaning: Immediately after use it is needed to wash the tool with warm water with soap or detergent and to dry it up.
Utilization: An empty container must be utilized in accordance with regional legislation. Any dried up product remainders can be disposed together with domestic garbage.
Safety advice: To store in a childproof place. It is forbidden to pour remainders into sewage. In a case of contact with eyes, wash with a lot of water. Soaked with the product materials (tissues, dresses, sponges) and tools must be washed up with water and soap and dried up in a fireproof container or on a fireproof surface as during the drying up process, a hazard is present of a spontaneous combustion. After that the materials can be disposed together with common garbage.

The compound contains completely natural substances. That is why before its application it is necessary to ensure that you do not suffer from allergy to vegetable substances and products of beekeeping!